Linux version 5.6.0 (olek@mocarz) (gcc version 9.2.0 (Buildroot 2019.11-git-00972-g74cfd2c0a0)) #7 Tue Apr 7 19:11:27 CEST 2020 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU x86/fpu: x87 FPU will use FXSAVE BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x0000000017ecffff] usable BIOS-e820: [mem 0x0000000017ed0000-0x0000000017ed6fff] ACPI data BIOS-e820: [mem 0x0000000017ed7000-0x0000000017ed7fff] ACPI NVS BIOS-e820: [mem 0x0000000017ed8000-0x000000001fffffff] reserved BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! SMBIOS 2.6 present. DMI: WYSE C CLASS/C CLASS, BIOS 1.0B 10/07/2009 tsc: Fast TSC calibration using PIT tsc: Detected 999.948 MHz processor e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0x17ed0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 base 017F00000 mask FFFF00000 uncachable 2 base 018000000 mask FF8000000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT initial memory mapped: [mem 0x00000000-0x013fffff] BRK [0x011dd000, 0x011ddfff] PGTABLE ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F67A0 000024 (v02 PTLTD ) ACPI: XSDT 0x0000000017ED2B5D 00004C (v01 PTLTD ? XSDT 06040000 LTP 00000000) ACPI: FACP 0x0000000017ED6984 0000F4 (v03 VX855 PTLTW 06040000 PTL_ 000F4240) ACPI: DSDT 0x0000000017ED2BA9 003D67 (v01 VIA PTL_ACPI 06040000 MSFT 0100000E) ACPI: FACS 0x0000000017ED7FC0 000040 ACPI: FACS 0x0000000017ED7FC0 000040 ACPI: SSDT 0x0000000017ED6A78 0004BA (v01 PPmmRe PPm 06040000 INTL 20030224) ACPI: APIC 0x0000000017ED6F32 00005A (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: MCFG 0x0000000017ED6F8C 00003C (v01 PTLTD MCFG 06040000 LTP 00000000) ACPI: HPET 0x0000000017ED6FC8 000038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) 382MB LOWMEM available. mapped low ram: 0 - 17ed0000 low ram: 0 - 17ed0000 Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] Normal [mem 0x0000000001000000-0x0000000017ecffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009cfff] node 0: [mem 0x0000000000100000-0x0000000017ecffff] Initmem setup node 0 [mem 0x0000000000001000-0x0000000017ecffff] On node 0 totalpages: 97900 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3996 pages, LIFO batch:0 Normal zone: 734 pages used for memmap Normal zone: 93904 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: HPET id: 0x11068201 base: 0xfed00000 [mem 0x20000000-0xdfffffff] available for PCI devices clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists, mobility grouping on. Total pages: 97134 Kernel command line: panic=30 consoleblank=0 printk.devkmsg=on ieee80211_regdom=PL tsc=unstable tsc: Marking TSC unstable due to boot parameter Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 370740K/391600K available (2218K kernel code, 223K rwdata, 892K rodata, 12740K init, 1132K bss, 20860K reserved, 0K cma-reserved) virtual kernel memory layout: fixmap : 0xfffe7000 - 0xfffff000 ( 96 kB) cpu_entry : 0xffc00000 - 0xffc2c000 ( 176 kB) vmalloc : 0xd86d0000 - 0xff7fe000 ( 625 MB) lowmem : 0xc0000000 - 0xd7ed0000 ( 382 MB) .init : 0xc044b000 - 0xc10bc000 (12740 kB) .data : 0xc032aba3 - 0xc0441e60 (1116 kB) .text : 0xc0100000 - 0xc032aba3 (2218 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Console: colour VGA+ 80x25 printk: console [tty0] enabled ACPI: Core revision 20200110 ACPI: setting ELCR to 0200 (from 0e00) clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.89 BogoMIPS (lpj=9999480) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 CPU: Centaur VIA Eden Processor 1000MHz (family: 0x6, model: 0xd, stepping: 0x0) Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Spectre V2 : Spectre mitigation: kernel not compiled with retpoline Speculative Store Bypass: Vulnerable L1TF: Kernel not compiled for PAE. No mitigation for L1TF MDS: Vulnerable: Clear CPU buffers attempted, no microcode Performance Events: no PMU driver, software events only. NMI watchdog: Perf NMI watchdog permanently disabled random: get_random_u32 called from bucket_table_alloc+0xc2/0xe1 with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear) thermal_sys: Registered thermal governor 'step_wise' NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem 0xe0000000-0xe00fffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe00fffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Added _OSI(Linux-Dell-Video) ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) ACPI: Actual Package length (8) is larger than NumElements field (2), truncated ACPI: Actual Package length (8) is larger than NumElements field (2), truncated ACPI: Actual Package length (8) is larger than NumElements field (2), truncated ACPI: 2 ACPI AML tables successfully acquired and loaded ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing PCI: Using host bridge windows from ACPI ACPI: Enabled 9 GPEs in block 00 to 0F ACPI: Enabled 1 GPEs in block 10 to 1F ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig Segments HPX-Type3] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-00] only partially covers this bridge acpi PNP0A03:00: host bridge window expanded to [mem 0x20000000-0xfff7ffff window] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cc1ff]) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfff7ffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1106:0409] type 00 class 0x060000 pci 0000:00:00.1: [1106:1409] type 00 class 0x060000 pci 0000:00:00.2: [1106:2409] type 00 class 0x060000 pci 0000:00:00.3: [1106:3409] type 00 class 0x060000 pci 0000:00:00.4: [1106:4409] type 00 class 0x060000 pci 0000:00:00.5: [1106:5409] type 00 class 0x080020 pci 0000:00:00.6: [1106:6409] type 00 class 0x060000 pci 0000:00:00.7: [1106:7409] type 00 class 0x060000 pci 0000:00:01.0: [1106:5122] type 00 class 0x030000 pci 0000:00:01.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref] pci 0000:00:01.0: reg 0x14: [mem 0xf8000000-0xf8ffffff] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] pci 0000:00:01.0: supports D1 D2 pci 0000:00:0f.0: [1106:c409] type 00 class 0x01018a pci 0000:00:0f.0: reg 0x20: [io 0x4460-0x446f] pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 pci 0000:00:10.0: reg 0x20: [io 0x4400-0x441f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 pci 0000:00:10.1: reg 0x20: [io 0x4420-0x443f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300 pci 0000:00:10.2: reg 0x20: [io 0x4440-0x445f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320 pci 0000:00:10.4: reg 0x10: [mem 0xf9304000-0xf93040ff] pci 0000:00:10.4: supports D1 D2 pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:11.0: [1106:8409] type 00 class 0x060100 pci 0000:00:11.7: [1106:a353] type 00 class 0x060000 pci 0000:00:13.0: [1106:b353] type 01 class 0x060400 pci 0000:00:14.0: [1106:3288] type 00 class 0x040300 pci 0000:00:14.0: reg 0x10: [mem 0xf9300000-0xf9303fff 64bit] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold pci_bus 0000:01: extended config space not accessible pci 0000:01:03.0: [1106:3119] type 00 class 0x020000 pci 0000:01:03.0: reg 0x10: [io 0x5000-0x50ff] pci 0000:01:03.0: reg 0x14: [mem 0xf9000000-0xf90000ff] pci 0000:01:03.0: supports D1 D2 pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:13.0: PCI bridge to [bus 01] pci 0000:00:13.0: bridge window [io 0x5000-0x5fff] pci 0000:00:13.0: bridge window [mem 0xf9000000-0xf90fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [LNKA] (IRQs 9 *10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *0, disabled. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes Expanded resource Reserved due to conflict with PCI Bus 0000:00 e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] e820: reserve RAM buffer [mem 0x17ed0000-0x17ffffff] clocksource: Switched to clocksource hpet pnp: PnP ACPI init system 00:00: [mem 0xe0000000-0xefffffff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved system 00:02: [mem 0xfff00000-0xffffffff] could not be reserved system 00:02: [mem 0xffee0000-0xffefffff] has been reserved system 00:02: [mem 0xfec00000-0xfec0ffff] has been reserved system 00:02: [mem 0xfee00000-0xfee0ffff] could not be reserved system 00:02: [mem 0xfed10000-0xfed100ff] has been reserved system 00:02: [mem 0xfed20000-0xfed200ff] has been reserved system 00:02: [mem 0xfed30000-0xfed3ffff] has been reserved system 00:02: [mem 0xffb80000-0xffb8ffff] has been reserved system 00:02: [mem 0xffb90000-0xffb9ffff] has been reserved system 00:02: [mem 0xffba0000-0xffbaffff] has been reserved system 00:02: [mem 0xffbb0000-0xffbbffff] has been reserved system 00:02: [mem 0xffbc0000-0xffbcffff] has been reserved system 00:02: [mem 0xffbd0000-0xffbdffff] has been reserved system 00:02: [mem 0xffbe0000-0xffbeffff] has been reserved system 00:02: [mem 0xffbf0000-0xffbfffff] has been reserved system 00:02: [mem 0xffc00000-0xffc0ffff] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active) system 00:03: [io 0x04d0-0x04d1] has been reserved system 00:03: [io 0xfe10-0xfe11] has been reserved system 00:03: [io 0xfe00] has been reserved system 00:03: [io 0x4000-0x407f] has been reserved system 00:03: [io 0x4100-0x411f] has been reserved system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) pnp: PnP ACPI: found 6 devices PnPBIOS: Disabled clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns pci 0000:00:01.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref] pci 0000:00:13.0: PCI bridge to [bus 01] pci 0000:00:13.0: bridge window [io 0x5000-0x5fff] pci 0000:00:13.0: bridge window [mem 0xf9000000-0xf90fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] pci_bus 0000:00: resource 10 [mem 0x20000000-0xfff7ffff window] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xf90fffff] NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 0, 4096 bytes, linear) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered PCI Interrupt Link [LNKB] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered PCI Interrupt Link [LNKD] enabled at IRQ 11 pci 0000:00:13.0: disabling DAC on VIA PCI bridge PCI: CLS 32 bytes, default 64 workingset: timestamp_bits=30 max_order=17 bucket_order=0 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 process '/bin/busybox' started with executable stack Freeing unused kernel image (initmem) memory: 12740K Write protecting kernel text and read-only data: 3112k Run /init as init process with arguments: /init with environment: HOME=/ TERM=linux NET: Registered protocol family 1 softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1) io scheduler mq-deadline registered watchdog: watchdog0: nowayout prevents watchdog being stopped! watchdog: watchdog0: watchdog did not stop! random: fast init done ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:10.4: EHCI Host Controller ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:10.4: debug port 1 ehci-pci 0000:00:10.4: irq 11, io mem 0xf9304000 ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 5.6.0 ehci_hcd usb usb1: SerialNumber: 0000:00:10.4 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: registered as rtc0 rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs SCSI subsystem initialized libata version 3.00 loaded. pata_via 0000:00:0f.0: version 0.3.4 scsi host0: pata_via scsi host1: pata_via ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4460 irq 14 ata2: DUMMY ata1.00: CFA: 128MB ATA Flash Disk, AD B612J, max UDMA/66 ata1.00: 250112 sectors, multi 0: LBA scsi 0:0:0:0: Direct-Access ATA 128MB ATA Flash 612J PQ: 0 ANSI: 5 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 10, io base 0x00004400 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 5.6.0 uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 9, io base 0x00004420 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 5.6.0 uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 11, io base 0x00004440 sd 0:0:0:0: [sda] 250112 512-byte logical blocks: (128 MB/122 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 5.6.0 uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected sd 0:0:0:0: [sda] Attached SCSI disk ACPI Warning: SystemIO range 0x0000000000004100-0x0000000000004107 conflicts with OpRegion 0x0000000000004100-0x000000000000410B (\_SB.PCI0.PIB.SMB0) (20200110/utaddress-204) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver snd_hda_intel 0000:00:14.0: Force to non-snoop mode VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.15 Copyright (c) 2002, 2003 VIA Networking Technologies, Inc. Copyright (c) 2004 Red Hat Inc. eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter eth0: Ethernet Address: 00:80:64:4c:63:57 snd_hda_intel 0000:00:14.0: CORB reset timeout#1, CORBRP = 0 input: PC Speaker as /devices/platform/pcspkr/input/input0 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 snd_hda_codec_generic hdaudioC0D0: inputs: snd_hda_codec_generic hdaudioC0D0: Mic=0x14 watchdog: watchdog0: nowayout prevents watchdog being stopped! watchdog: watchdog0: watchdog did not stop! Velocity is AUTO mode EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: errors=continue,commit=60 ext4 filesystem being mounted at /media/sda supports timestamps until 2038 (0x7fffffff) random: dnsmasq: uninitialized urandom read (128 bytes read) random: dnsmasq: uninitialized urandom read (48 bytes read) watchdog: watchdog0: nowayout prevents watchdog being stopped! watchdog: watchdog0: watchdog did not stop! random: crng init done eth0: Link auto-negotiation speed 100M bps full duplex NET: Registered protocol family 17 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (48 C) Warning: Processor Platform Limit event detected, but not handled. Consider compiling CPUfreq support into your kernel.